Using The Race Timer - Citizen Movement Caliber C660 Setting Instructions Manual

11. Using the Race Timer

The race timer is able to set the time for 5-minute intervals for times between
60 and 10 minutes, and to 6,5,4,3,2 and 1 minute.
<Setting the Race Timer>
3. Turn the crown and set the mode hand to the [RACE] race timer position.
4. When the crown is pulled out to the first click, (race timer setting
position), the watch enters the minute correction state.
The Race Timer Setting Time (minutes flashes in Digital Display 2.
<Race Timer Initial
Setting Display>
When pressing buttons, the eration confirmation tone sounds to confirm
operation
After starting, a warning tone is sounded when 11, 10, 6, 5, 4, 3 or 2
minutes or 1 minute remain or when 50, 40, 30, 20, 10, 5, 4, 3, or 2 seconds
or 1 second remain
However, when 11, 10, 6, 5, 4, 3 or 2 minutes or 1 minute are set, the
warning signal for the remaining time does not sound.
4. When timing of the set time is finished, the Time Up Tone sounds, while
simultaneously the auto chronograph starts operation.
Return to Table of Contents
3.
Turn the crown to set the Race Timer
Setting (minutes)
When the crown is turned to the right,
correction is made in a positive direction.
When the crown is turned to the left,
correction is made in a negative direction.
The function hand moves automatically in
conjunction with the Race Timer Setting
Time (minutes)
4.
After Corrections have been completed,
return the crown to the normal position.
<Timing Using the Race Timer>
1. When pressing button (A), the race timer starts
counting down from the set time while the second
hand starts moving counter-clockwise
2. When pressing button (A) during the countdown, the
race timer stops. When pressing button (A) once
more while the race timer is stopped, the race
timer starts counting again.
When pressing button (B) during the countdown, the
race timers is initialized and starts counting
down from the beginning.
3. When pressing button (B) while the race timer is
stopped, the race timer returns to the initial
setting time.
Return to Table of Contents