Using The Timer - Citizen Movement Caliber C660 Setting Instructions Manual

13. USING THE TIMER

The timer can be set to a maximum of 99 minutes in 1-minute units. When the set
time has elapsed, a tone indicating that the set time is up sounds for about 5
seconds, after which the timer returns to the timer initial setting display.
<Timer Initial Setting Display>
<Timer Initial Setting Display>
Return to Table of Contents
<Setting the Timer>
1. Turn the crown to set the mode hand to the
timer [TMR] mode.
2. Pull out the crown to the second click
(timer setting position) to enter the
"minutes" correction state.
Timer Setting Time (minutes) flashes in
digital display 2.
3. Turn the crown forward to set the "minutes"
timer setting time.
When the crown is turned forward
(clockwise), correction can be made in the
positive direction. When the crown is
turned backward (counter-clockwise),
correction can be made in the negative
direction.
4. After setting, return the crown to the
normal position.
<Timing using the Timer>
1. When pressing button (A) the timer starts
counting down from the time set.
2. Pressing button (A) again during
measurement stops the timer and pressing
button (A) once more wile the timer is
stopped, restarts the timer.
*Pressing button (B) during timer
measurement returns the watch to the
timer initial setting display and resumes
countdown from the beginning
3.
Pressing button (B) when the timer is
stopped returns the watch to the timer
initial setting display.
*When pressing the button, the operation
confirmation tone sounds
Return to Table of Contents