Connections; Connecting Speakers And Source Components - Yamaha A-S501 Owner's Manual

CONNECTIONS

Connecting speakers and source components

Make sure to connect L (left) to L, R (right) to R, "+" to "+" and "–" to "–". If the connections are faulty, no sound will
be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be unnatural and
lack bass. Refer to the owner's manual for each of your components.
Make sure to use RCA cables or optical cable to connect audio components.
CAUTION
Do not connect this unit or other components to the main power until all connections between components are complete.
Speakers A
Turntable TV, etc. Right Left
DVD player,
etc.
Tuner
BD player, etc.
Audio Audio Audio Audio Audio
out GND out out out out
Audio Audio Audio Audio Audio
out out In In out
CD player Tape deck, CD recorder, Subwoofer Right Left
etc. etc.
Speakers B
Only PCM signals can be input to the DIGITAL (OPTICAL/COAXIAL) jacks of this unit. For details on the supported
PCM signals, see page 15.
y
• The PHONO jacks are designed for connecting a turntable with an MM cartridge.
• Connect your turntable to the GND terminal to reduce noise in the signal. However, for some turntables, you may hear less noise
without the GND connection.
9
En