Miele KF 1801 Vi Operating And Installation Instructions page 13

~
Faulty components must only be replaced by genuine Miele
spare parts. The manufacturer can only guarantee the safety of the
appliance when Miele replacement parts are used.
~
Miele cannot be held liable for damage caused by a faulty
connection to the mains water supply.
~
Connection to the mains water supply and any repairs to the ice
cube maker must only be carried out by a Miele approved
technician.
~
The ice cube maker is not suitable for connection to a hot water
supply.
~
Connect the appliance to a potable water supply only.
~
Before plumbing the appliance in, ensure that it is disconnected
from the mains electricity supply.
~
Never tamper with the movable components on the ice cube
maker or the element on the ice cube maker. Danger of injury!
Correct use
~
The appliance is designed for use within a certain climate range
(ambient temperatures), and should not be used outside this range.
The climate range of the appliance is stated on the data plate inside
the appliance. Installing the appliance in a room with too low an
ambient temperature, e.g. a garage, can lead to the appliance
switching off for longer periods so that it cannot maintain the
required temperature.
~
To ensure proper air flow in and out of the appliance, the air vents
must not be covered or blocked in any way.
It would also increase the energy consumption and could cause
damage to the appliance.
Warning and Safety instructions
13