Wi-Fi Set Up; Software Setup - Type A Machines SERIES 1 User Manual

2014 Series 1 User Manual | Version 1.2
It's a good idea to closely examine the first layer as it prints. This is the most critical part of the print. The extruded
filament should spread onto the print surface and adhere to it. It should not be stringy nor should it be crushed
into the surface. If you have a problem with adhesion or extrusion, try resetting the Z height, retest the build
platform alignment, and change the surface treatment.

4 Wi-Fi Set Up

Once initial set up is done using Ethernet, you can connect to your printer via Wi-Fi.
If you have not already, attach the Wi-Fi antenna to the back of the printer by screwing it on. It is a good idea to
set your printer up in the same room as your wireless base station for the first connection. Once you have it
working you can move the printer to your desired location and then test to make sure the printer is still within Wi-
Fi range.
In the printer's web interface click "Settings" in the top right of the window, then click "Network" at the bottom of
the page. Enter or select your Wi-Fi network in the "SSID (Network Name)" field. If a password is required, type
your Wi-Fi password into the password field. You can now connect to your printer's web interface using the same
URL you entered initially when connecting via Ethernet.

5 Software Setup

typeamachines.com
13