Type A Machines SERIES 1 User Manual page 15

2014 Series 1 User Manual | Version 1.2
CAUTION: The print head is hot and you may burn yourself if you touch it or newly extruded filament.
If your GCode is set to extrude filament prior to starting the print, you can manually remove this extra filament
with the print removal spatula, or allow it to be wiped off on the build surface. The print head will then begin
creating your print.
The front fan will remain off while printing the first few layers. The fan should turn on later to help solidify the
printed part. The rear fan is always on when the print head is above 50˚ Celsius.
typeamachines.com
12