Verifying And Calibrating The Z Height - Type A Machines SERIES 1 User Manual

2014 Series 1 User Manual | Version 1.2
The printer's web interface is shown above. If your printer has not connected to its web interface after 5 minutes,
try connecting again. First turn off the power, next check that the Ethernet cable is connected correctly, and then
turn on the power again and wait a few minutes for the printer to establish a connection.

3.6 Verifying and Calibrating the Z Height

The 2014 Series 1 3D printer features a black Z
height adjustment knob, shown left, at the top
right of the build area. That knob is used to
increase or decrease the distance between the
print head nozzle and the build surface for the first
layer of a print.
The Z height adjustment knob works by triggering
a microswitch mounted to the build platform
arms. It is adjusted in the factory so that the
typeamachines.com
9