Child Seat Fit Requirements - Britax FRONTIER CT User Manual

Child Seat Fit Requirements

Harness Mode:
Harness mode use of this child seat is ONLY
WARNING!
for children who meet ALL of the following requirements. If the
child does not meet all harness mode requirements because
the child is too small, another type of child seat MUST be used.
If your child does not meet all harness mode requirements
because they are too large, you may need to use this child
seat in booster mode. Thoroughly review all fit requirements
before using the child seat.
Children must:
1 be at least two years of age and
2 weigh between 11.3 and 29.5 kg (25 and 65 lbs) and
3 stand between 76.2 and 147.3 cm (30 and 58 in.) in height
and
4 the top of the child's
ears must be below the
top of the head restraint
when seated and
4
Above Shoulder Level
Shoulder level
Below Shoulder Level
5 the harness straps
must be in the closest
position at or above the
child's shoulders when
seated.
Booster Mode:
WARNING! Booster mode use of this child seat is ONLY for
children who meet ALL of the following requirements. Use only the
vehicle's lap and shoulder belt to secure the child. If the child does not
meet all booster mode requirements because the child is too small,
you may need to use this child seat in harness mode. Thoroughly
review all fit requirements before using the child seat.
Children must:
1 weigh between 18.1 and 54.4 kg (40 and 120 lbs) and
2 stand between 114.3 and 157.5 cm (45 and 62 in.) in height
and
3 the top of the child's ears must be below the top of the head
restraint and
4 the shoulder belt must be appropriately positioned across the
center of the child's chest in the closest position at or above
the child's shoulder through the shoulder belt guide and
5 the lap belt is routed under the armrests, low across the
child's upper thighs.
NOTE: Britax recommends booster mode only after the child
outgrows harness mode.
Child Seat Fit Requirements
5