Editing Your Recordings - Archos TV+ User Manual

TV+
2. In the Home screen, select the "
Video Recorder
cess the "
3. This screen will allow you to adjust the recording sound gain (left/right arrows) as
well as configure other recording parameters (see next section) .
4. Start the recording by pressing the OK button. You can pause and resume your
recording at any time (OK button).
5. Close the screen
* All audio recordings made by your ARCHOS device are saved in the Music/
(Rec) folder. If you wish to keep them in a different location, you can use the
"Move" function of the ARCHOS file browser after recording.
"AUdIo RECoRdER" SETTINGS
Audio Recorder
To access the "
-
"Set Title":
allows you to give a personalized title to the recording, using the remote con-
trol's keyboard.
-
"Format":
you can choose between "
WAV format.
-
"Sampling":
choose the sample rate for your recording (a higher rate gives higher sound
quality but a larger file).
Be careful that the audio source is supplying a line-level and not an amplified
signal. A signal that is amplified too much will result in a terribly distorted re-
cording.
10.4 ediTing yOur reCOrdings
• Video files recorded with the ARCHOS can be edited by deleting the sections you
do not wish included. The editing you can do is either cropping or cutting of par-
ticular segments of the video file.
• You will mark a segment of your video file, and then you will tell the ARCHOS to
delete everything except the marked segment or to delete the marked segment from
the video file. These operations can be done multiple times on the same video file.
• Once finished, you will have the option to save the edit marks with the video or to
write a new video file. If you save your file with edit marks, you can always go back
and change your edits at another time. The actual video information is not deleted. On
the other hand, you can write a new file which will only include the video parts that
you specified in the edit session. This file will be smaller but you can never un-edit it.
MANUAL
V1.0
Recorder
" mode. Then select the "
to stop and save the recording*.
" settings screen, select the "
PCM
oTHER RECoRdING fUNCTIoNS > P. 71
" icon and use the tabs (
Audio Recorder
" (uncompressed) and "
button) to ac-
" menu item.
Settings
" menu item:
ADPCM
" (compressed)