TV+
"Cancel"
-
use this button to discard any changes you may have made since entering this screen.
7.4 "neTwOrK" seTTings
"neTwOrK" seTTings
•
The first time you turned on your ARCHOS, the installation wizard helped
you configure the WiFi and Ethernet connections.
•
Every time you restart your ARCHOS, it will automatically connect to the
last configured network.
•
This section explains how to change your Network configuration, for exam-
ple if you want to connect to a different network.
•
This screen displays your connection
status.
Network Details
•
Select the "
to view the information concerning
the network the ARCHOS is currently
connected to: IP, security details, etc.
•
You have the possibility to connect
to the internet via the WiFi or via an
Ethernet cable.
ETHERNET CAbLE CoNNECTIoN
Connect to an Ethernet Network...
•
Select "
•
Use the same procedure as for a WiFi open network when using an Ethernet cable.
Jump ahead to the WiFi section Open Networks .
•
wIfI CoNNECTIoN
When you select "
networks. The list of available networks will be displayed.
The List of Available Networks
•
The list of available networks shows
all the wireless networks in range of
your device.
•
In the list of available networks, you
will see the following information:
MANUAL
V1.0
" button
Connect to a WiFi Network...
"
", The ARCHOS will scan for available
MAIN SETTINGS > P. 49