Scheduling Your Recording - Archos TV+ User Manual

TV+
-
"Key: -/--": Set to "
entering a channel with several digit numbers (that is to say a channel greater than 9). This key is often
represented with this symbol: "-/--".
-
"Switches on with": see below.
-
"Time until video": see below.
If the ARCHOS did not manage to switch your tuner to the selected channel,
you can try using a different ON/OFF code (see: 1
and do the 2 test again.
nd
3. After you selected "
You will have to set these two parameters:
-
Switches on with
"
tuner's remote control, to turn it on. If you normally press the "
select " Power
you can press any key, select "
-
Time until video
"
moment you turn on your tuner, and the moment the image appears on your
0...10 seconds
TV ("
4. When you have finished, select "
OK
Select " ".
9.5 sCheduling yOur reCOrding
1. In the Home screen, select the
" Recorder " icon to display the
ARCHOS TV Program Guide.
2. This screen's menu items will al-
low you to choose a different day,
update the Program Guide data, or
change various settings (program
guide update and channel list con-
figuration).
MANUAL
V1.0
On
" if normally, you need to press a special key on your tuner's remote control before
Yes " at the end of the 2
": this depends on what key you normally press, on your
". If you can press any channel key, then select "
": select the amount of time it normally takes between the
10...30 seconds
", "
Done
st
step, the following screen appears.
nd
Any key
".
>30 seconds
", "
", and a confirmation message will appear.
THE TV PRoGRAM GUIdE > P. 66
Test: turning your tuner off)
Power
Any channel
").
" key,
". If