Inflating Rafts: To properly inflate your NRS raft, valves need to be in the closed position. Push the valve stem in and turn it clockwise so that the stem pops up, sealing the valve. Choose a chamber to inflate first. Fill the chamber with air until it takes shape, filled out but not firm.
Inflating Inflatable Kayaks: To properly inflate an NRS IK, inflate both main tubes until they take shape. Then top them off to 2.5 psi. Because of the small tube size, slight overinflation is acceptable to increase performance. Inflate the floor until the PR valve engages, allowing air to leak out.
Proper care and maintenance will improve your boat’s appearance and longevity. Clean and inspect the boat after each use. We recommend you coat your raft with 303 Protectant (available through NRS or your local dealer; item #38751.01) every few months during the season, and before long-term storage to protect against UV damage and degradation.
8-12 hours. Many difficult repairs are best performed by a professional raft repair center. Please call or e-mail NRS Customer Service for more information about repair centers in your area. Our phone number is 1-800-635-5202, and our email address is service@nrs.com.
LIMITED WARRANTY NRS inflatables are guaranteed to the original owner of the board to be free from defects in workmanship and materials for three years from the date of purchase under normal recreational, commercial or rescue use. If, after inspection, we find that the board failed due to a covered defect, it will be repaired or replaced at our option without charge.
Page 7
ACTIVATE WARRANTY BY RETURNING THIS CARD You can also register your boat warranty online at: nrs.com/warranty. Your responses will be used only by NRS to improve our products and services. All information will be confidential and for NRS use only.
This manual is also suitable for:
Otter seriesRiver seriesKodiak seriesMaverik series
Need help?
Do you have a question about the expedition series and is the answer not in the manual?
Questions and answers