Table of Contents
Advertisement
EngliSh
FC_PlatinumEN_A6_CS3_koizumi.indd 35
Sanitizing (select models)
- With the UV sanitizer you can clean your brush
head after every use.
Unplug the sanitizer, discontinue use and
call Consumer Care if:
-
The UV light bulb remains on when the door is
open.
-
The window is broken or missing from the
sanitizer.
-
The sanitizer gives off smoke or a burning smell
while it is operating.
Note: UV light can be harmful to the human eye and
skin. This device should be kept out of reach of children
at all times.
1
After brushing, rinse the brush head and shake
off excess water.
Do not place the travel cap on the brush head
during sanitization.
2
Place your finger in the door recess on top of
the sanitizer and pull open the door.
3
Place the brush head on one of the 2 pegs in
the sanitizer with the bristles facing the light
bulb.
Note: Only clean Sonicare snap-on brush heads in the
sanitizer.
Note: Do not clean Sonicare for Kids brush heads in
the sanitizer.
4
Make sure the sanitizer is plugged into a live
outlet of appropriate voltage.
5
Close the door and press the green power on/
off button once to select the UV clean cycle.
35
13.4.29 1:58:26 PM
Advertisement
Table of Contents
