Table of Contents
Advertisement
EngliSh
FC_PlatinumEN_A6_CS3_koizumi.indd 31
3
gum care: Combines Clean mode with
an additional minute to gently stimulate and
massage gums to improve gum health.
Your Sonicare comes with the Clean mode activated.
Note: When the toothbrush is switched on, you cannot
toggle between modes.
1
Prior to turning on the Sonicare, press the
mode button to toggle between modes.
The selected brushing mode illuminates.
,
Once a brushing mode has been selected, it
,
remains active until another brushing mode is
selected.
Note: When the Sonicare is used in clinical studies,
the default 2-minute Clean mode must be selected.
The handle has to be fully charged and the Easy-start
feature must be deactivated.
Intensity levels per mode
- low: 1 LED indicator light
- Medium: 2 LED indicator lights
- high: 3 LED indicator lights
Note: to adjust the intensity level to the next higher
or lower level, you can press the + button to increase
intensity or the - button to decrease intensity at any
time during the brushing cycle.
Pressure Sensor
A change in vibration (and a slight change in sound)
alerts you when you apply too much pressure while
brushing. See chapter 'Features'.
Battery status (when handle is not on
charger)
-
1 yellow LED indicates a low charge.
31
13.4.29 1:58:25 PM
Advertisement
Table of Contents
