Specifications - M-tech Legend II Instruction Manual

SPECIFICATIONS

General
Channels
Frequency Range
Frequency Control
Frequency Tolerance
Operating Temperature
Microphone
Input Voltage
Current Drain
Size
Weight
Antenna Connector
LED Meter
Filter
Transmitter
Power Output
Modulation
Freq. Response
Output Impedance
Receiver
Sensitivity
Adjacent Channel Rejection
Image Rejection
I.F. Frequency
RF Gain Control
Automatic Gain Control (AGC)
Squelch
Audio Output Power
Freq. Response
Distortion
Specifications and features are subject to change without notice.
40 AM/FM (Config. E)
26.965 to 27.405 MHz (Config. E)
Phase Locked Loop (PLL) synthesizer
±600Hz
-10ºC to +55ºC
Electret condenser Type Microphone
13.2 V DC
TX full mod., 2.0A Max
RX with max. audio output, 1.5A Max
115(L) x 180(H) x 35(D) mm
0.8kg
UHF, SO-239
Indicates relative RF output and received
signal strength
ANL(Automatic Noise Limiter) built-in
4Watts AM / 4 Watts FM
Class B amplitude modulation
300-3000 Hz in AM/FM
50 ohms, unbalanced
0.7μV for 20dB SINAD typical(limit 1.4μV)
66dB typical
75 dB typical
Double Conversion Superheterodyne
1st 10.695 MHz
2nd 455 KHz
Adjustable for optimum reception – More
than
20 dB (@1μV)
less than 10dB change in audio output for
inputs from 10
Adjustable; threshold less than1μV
5 watts max. into 8 ohms
300 to 3,000 Hz
Less than 10%, 0.5W 1KHz
P.10