Lexmark E320/E322 User Reference Manual page 77

Problem
The media skews or buckles.
The paper sticks together/printer
feeds multiple sheets of paper.
The paper fails to feed from tray 1.
The paper fails to feed from the
optional tray 2.
The Load Paper light is on even
though there is paper loaded in the
optional tray 2.
What to do
• Don't overfill tray 1 or the optional tray 2 (see media
capacities in the Media types and sizes
• Make sure the paper guides are flush against the edges of
the media.
• Remove the paper from tray 1 or the optional tray 2 and fan
the paper.
• Don't overfill tray 1 or the optional tray 2 (see media
capacities in the Media types and sizes
• Remove the paper from tray 1 and fan the paper.
• Make sure tray 1 is selected from the printer driver.
• Do not overfill the tray.
• Make sure the optional tray 2 is selected from the printer
driver.
• Make sure the tray is pushed all the way in.
• Make sure the metal plate is pressed down before inserting it
into the printer.
Note: After the tray is inserted, the metal plate springs back up
so the paper can feed into the printer.
• Make sure the paper does not exceed the stack height
indicator.
• Make sure the paper is under both corner bucklers (see
Loading Paper).
• Remove the paper from the optional tray 2 and fan the paper.
• Make sure the tray is pushed all the way in.
75
table.
chart.