Sony MDR-XB950BT Quick Start Manual page 95

Help Guide
How to Use
Wireless Stereo Headset
MDR-XB950BT
Receiving a call
You can enjoy a hands-free call with a smartphone or mobile phone that supports the BLUETOOTH profile HFP (Hands-
free Profile) or HSP (Headset Profile), via a BLUETOOTH connection.
If your smartphone or mobile phone supports both HFP and HSP, set it to HFP.
Operations may vary depending on the smartphone or mobile phone. Refer to the operating instructions supplied with
your smartphone or mobile phone.
Ring tone
When an incoming call arrives, a ring tone will be heard from the headset.
The ring tone varies in the following ways, depending on your smartphone or mobile phone.
Ring tone set on the headset
Ring tone set on the smartphone or mobile phone
Ring tone set on the smartphone or mobile phone only for a BLUETOOTH connection
1. Connect the headset to a smartphone or mobile phone beforehand.
2. When you hear a ring tone, press the
When an incoming call arrives even while you are listening to music, playback pauses and a ring tone will be heard
from the headset.
If no ring tone is heard via the headset
The headset may not be connected with the smartphone or mobile phone with HFP or HSP. Check the
connection status on the smartphone or mobile phone.
If playback does not pause automatically, operate the headset to pause playback.
3. Press the VOL+ or VOL- button to adjust the volume.
4. To end the call, press the
If you were listening to music when the call arrived, playback will resume when the call ends.
(call) button on the headset and receive the call.
(call) button on the headset again.
87