Sony MDR-XB950BT Quick Start Manual page 85

Help Guide
How to Use
Wireless Stereo Headset
MDR-XB950BT
Using the supplied headphone cable
You can use the headset as ordinary wired headphones by connecting a device via the supplied headphone cable. The
headset can be charged while in use.
1. Connect a playback device to the INPUT jack with the supplied headphone cable.
If you connect the headphone cable when the headset is on, the headset turns off automatically.
Note
Make sure you connect the L-shaped plug to the playback device.
Use the supplied headphone cable only.
Make sure you insert the plug firmly.
The BLUETOOTH and Electro Bass Booster functions cannot be used.
The jog switch ( /
Hint
When an incoming call arrives, a ring tone will be heard via the headphones. Answer the call using your smartphone
or mobile phone, and talk using the microphone of the phone. You can hear the voice of the caller from the
headphones.
If you disconnect the headphone cable from the smartphone or mobile phone, you can talk using the microphone and
speaker of the phone.
/ / ) and VOL +/- buttons cannot be used.
4-546-438-11(1)
Copyright 2014 Sony Corporation
77