Sony MDR-XB950BT Quick Start Manual page 63

5. Touch the headset with the smartphone.
Confirm that the screen of the smartphone is unlocked.
Touch the smartphone on the N marked part of the headset. Keep touching the headset with the smartphone until
the smartphone reacts.
Refer to the operating instructions of the smartphone for the designated location to be touched on the
smartphone.
Follow the on-screen instructions to complete the pairing and connection.
When the headset is connected with the smartphone, the blue indicator starts flashing slowly.
To disconnect, touch the smartphone again.
To connect a paired smartphone, perform steps 4 and 5.
Hint
If you cannot connect the headset, try the following.
Start the app "NFC Easy Connect" on the smartphone, and move the smartphone slowly over the N marked part of the
headset.
If the smartphone is in a case, remove the case.
Make sure that the app "NFC Easy Connect" screen is displayed on the smartphone.
If you touch an NFC-compatible smartphone with the headset, the smartphone terminates BLUETOOTH connection
with any current device, and connects to the headset (One-touch connection switching).
Related Topic
How to make a wireless connections to BLUETOOTH devices
Disconnecting the smartphone by one touch (NFC)
Switching the device by one touch (NFC)
Listening to music from a device connected via BLUETOOTH
55