Sony MDR-XB950BT Quick Start Manual page 76

Help Guide
How to Use
Wireless Stereo Headset
MDR-XB950BT
Pairing and connecting with other BLUETOOTH devices
Pairing is the process required to create a link between BLUETOOTH devices to allow wireless connection.
You must pair a device with the headset to be able to make a BLUETOOTH connection for the first time.
Before you start pairing operation, make sure that:
The BLUETOOTH device is placed within 1 m (3 feet) of the headset.
The headset is charged sufficiently.
The operating instructions of the BLUETOOTH device is on hand.
1. Enter pairing mode on this headset.
When you pair the headset with a device for the first time after you bought it, or after you initialized the headset (the
headset has no pairing information), press and hold the POWER button for about 2 seconds when the headset is
turned off. The headset enters pairing mode automatically.
When you pair a 2nd or subsequent device (the headset has pairing information for other devices), press and hold
the POWER button for about 7 seconds.
Make sure that the indicator flashes blue and red alternately after you release the button.
2. Perform the pairing procedure on the BLUETOOTH device to search for this headset.
[MDR-XB950BT] will be displayed on the list of detected devices on the screen of the BLUETOOTH device. If not
displayed, repeat from step 1.
3. Select [MDR-XB950BT].
If passkey (*) input is required on the display of the BLUETOOTH device, input "0000."
*
A Passkey may be called a "Passcode," a "PIN code," or a "Password."
68