Fine Cartridge Holder Does Not Move To The Position For Replacing - Canon MG2900 series Online Manual

FINE Cartridge Holder Does Not Move to the Position for Replacing

Is the ON lamp off?
Check1
Check if the ON lamp is lit.
The FINE cartridge holder will not move unless the power is on. If the ON lamp is off, close the cover and turn
the machine on.
Is the Alarm lamp flashing?
Check2
Close the cover, confirm the number of times the Alarm lamp is flashing, take the appropriate action to resolve
the error, and then reopen it. For details on how to resolve the error, see
Has the cover been left open for 10 minutes or longer?
Check3
If the cover is left open for more than 10 minutes, the FINE cartridge holder moves to the position to protect it to
prevent the print head from drying out. Close and reopen the cover to return the FINE cartridge holder to the
position for replacing.
Has the machine been printing continuously for a long period?
Check4
If the machine has been printing continuously for a long time, the FINE cartridge holder may not move to the
position for replacing since the print head may overheat.
Note
• Do not open the cover while printing is in progress; otherwise, an error occurs.
Support Code
654
List.