Fine Cartridge Holder Does Not Move To The Position For Replacing - Canon MX490 series Online Manual

FINE Cartridge Holder Does Not Move to the Position for Replacing

Is the POWER lamp off?
Check1
Check if the POWER lamp is lit.
The FINE cartridge holder will not move unless the power is on. If the POWER lamp is off, close the paper output
cover and turn the machine on.
Is the Alarm lamp flashing?
Check2
Close the paper output cover, confirm the number of times the Alarm lamp is flashing, take the appropriate
action to resolve the error, and then reopen it. For details on how to resolve the error, see
for Error.
Has the paper output cover been left open for 10 minutes or longer?
Check3
If the paper output cover is left open for more than 10 minutes, the FINE cartridge holder moves to the position to
protect it to prevent the print head from drying out. Close and reopen the paper output cover to return the FINE
cartridge holder to the position for replacing.
Has the machine been printing continuously for a long period?
Check4
If the machine has been printing continuously for a long time, the FINE cartridge holder may not move to the
position for replacing since the print head may overheat.
Note
• Do not open the paper output cover while printing is in progress; otherwise, an error occurs
Downloaded from ManualsPrinter.com Manuals 891
List of Support Code