Lexmark 840 Series User Manual page 18

Load up to
20 sheets of banner paper
100 sheets of custom-size paper
(depending on the thickness)
Make sure
•
You remove all the paper from the paper support before loading the
banner paper.
•
You tear off only the number of pages needed to print the banner.
•
The banner paper is placed on a level surface behind the printer and
fed up over the paper support.
•
You have selected the correct paper size for the banner in Print
Properties. For more information, see "Using Print Properties" on
page 14.
•
The paper is loaded against the right side of the paper support.
•
The paper guide rests against the left edge of the paper.
•
The print side of the paper faces you.
•
The paper size fits within these dimensions:
Width:
–
76–216 mm
–
3.0–8.5 inches
Length:
–
127–432 mm
–
5.0–17.0 inches
•
The paper is loaded against the right side of the paper support.
•
The paper guide rests against the left edge of the paper.
Loading paper and various paper types
18