Lexmark 810 Series Color Jetprinter Quick Start Manual

810 Series Color Jetprinter™
Unpack your printer. Unpack your printer.
1
Note: Contents may vary
based on geography.
Note: You may need to purchase a USB cable
separately.
Note: You may need to purchase a USB cable
separately.
Raise the paper support.
4
Raise the paper support.
Open the cartridge lids, insert the cartridges, and snap the lids closed.
8
Open the cartridge lids, insert the cartridges, and snap the lids closed.
21G0077
Your printer may include a
Note: Contents may vary
photo cartridge instead of a
based on geography.
black print cartridge.
Your printer may include a
photo cartridge instead of a
black print cartridge.
Before you continue,
remove the photo
cartridge from the print
cartridge storage unit.
Before you continue,
remove the photo
cartridge from the print
cartridge storage unit.
Reminder: Save the print cartridge storage
unit to protect unused cartridges.
Reminder: Save the print cartridge storage
unit to protect unused cartridges.
Extend the paper exit tray.
5
Extend the paper exit tray.
Safety information
• Use only the power supply provided with this product or the manufacturer's authorized
replacement power supply.
• Connect the power supply cord to an electrical outlet that is near the product and easily
accessible.
• Refer service or repairs, other than those described in the user documentation, to a
professional service person.
CAUTION: Do not set up this product or make any electrical or cabling connections, such as the
power supply cord, during a lightning storm.
Connect the power cord.
2
Connect the power cord.
Raise the access cover.
6
Raise the access cover.
Close the access cover.
9
Close the access cover.
Safety information
• Use only the power supply provided with this product or the manufacturer's authorized
replacement power supply.
• Connect the power supply cord to an electrical outlet that is near the product and easily
accessible.
• Refer service or repairs, other than those described in the user documentation, to a
professional service person.
CAUTION: Do not set up this product or make any electrical or cabling connections, such as the
power supply cord, during a lightning storm.
www.lexmark.com
Make sure the power is on.
3
Make sure the power is on.
Remove the sticker and tape from the bottom of the print cartridges.
7
Remove the sticker and tape from the bottom of the print cartridges.
Load paper and adjust the paper guide.
10
Load paper and adjust the paper guide.
11 - 14