Viewing still pictures
Mode dial
Set the mode dial to q (playback mode)
1
and turn the camera on.
g"Turning the power on/off" (P.25)
• The last picture taken is displayed. (Single-frame
playback)
• Shooting information is displayed for about 3
seconds. You can change how much information is
displayed on the screen.
g"INFO – Displaying shooting
information" (P.135)
• For details of the information displayed, see
"Viewfinder and monitor indications" (P.11).
2
Use the arrow pad or control dial to play back other pictures.
• Arrow pad
Displays the previous picture.
• Control dial
Displays the previous picture.
• If no operation is performed for about 3 minutes, the camera automatically
enters the sleep mode and the monitor or viewfinder turns off. Press f or
Note
any button to turn the monitor or viewfinder on.
7 Playback
Jumps to the picture 10 frames back.
Jumps to the picture 10 frames ahead.
Mode dial
Arrow pad
Control dial
'04.04.17 15:30
'04.04.17 15:30
Displays the next picture.
Displays the next picture.
7
121