Olympus C-8080 Wide Zoom Quick Start Manual page 119

External flash (optional)
Press e while holding down #.
2
Press ac to select Q FLASH, then
3
press d.
g"Menu basics" (P.38)
To use the external flash only
Select Q, then press e.
To use the external flash together with the built-in flash, use Olumpus flash
bracket and the bracket cable (both optional).
Select IN+Q, then press e.
4
Turn on the external flash.
• Set the mode dial to TTL-AUTO.
4
• Be sure to attach the flash to the camera before turning the flash on.
5
Select the flash mode by turning the control dial while holding
down #.
g"Flash shooting" (P.59)
• If close-up pictures are overexposed, try using the built-in flash by itself.
• When the built-in flash and the external flash are used together, the built-in
Note
flash is used as the compensating light source. This means that if the
amount of light from the external flash is insufficient (beyond its working
range), the resulting pictures may be underexposed.
66
FLASH MODE
IN+
FLASH
SLOW
SLAVE
SELECt GO