P-Af - Changing The Auto Focus Mode - Olympus C-8080 Wide Zoom Quick Start Manual

Olympus c-8080 wide zoom digital camera
Hide thumbs Also See for C-8080 Wide Zoom:
Table of Contents

Advertisement

Focusing applications
P-AF – Changing the auto focus mode
For auto focusing, this camera is equipped with a
contrast detection system measured by CCD and a
phase difference detection system measured by AF
sensor. You can select whether to use only the
contrast detection system or to use the contrast
detection system in conjunction with the phase
difference detection system.
OFF
The camera focuses on the subject using
only the contrast detection system.
ON
The camera focuses on the subject using both the contrast detection
system and the phase difference detection system. Focusing is
performed faster than when OFF is selected.
5
Mode dial
Press e while holding down AF/&/MF.
1
• In MF or %MF mode, the menu is not displayed
when e is pressed.
Press ac to select P-AF, then press d.
2
Press ac to select ON or OFF, then
3
press e.
• Press e again to exit the menu.
• When the subject is within 80 cm (2.6 ft.) of the camera, the camera focuses
using only the contrast detection system.
Note
• Focusing may take some time if P-AF is set to ON when a conversion lens
or underwater housing is attached to the camera.
• In n mode, P-AF is fixed to OFF. The setting cannot be changed.
76
AF sensor
AF/&/MF
AF/Macro/MF button
Arrow pad
OK button
FOCUS MODE
AF MODE
FULLtIME AF
P - AF
OFF
ON
SELECt
GO

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents