Sony UP-D711MD Instructions For Use Manual page 3

Important EMC notices for use in the medical environments
• The UP-D711MD needs special precautions regarding
EMC and needs to be installed and put into service
according to the EMC information provided in this
instructions for use.
• The portable and mobile RF communications
equipment such as cellular phones can affect the UP-
D711MD.
Guidance and manufacturer's declaration-electromagnetic emissions
The UP-D711MD is intended for use in the electromagnetic environment specified below.
The customer or the user of the UP-D711MD should assure that it is used in such an environment.
Emission test
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations/flicker emissions
IEC 61000-3-3
Warning
If the UP-D711MD should be used adjacent to or
stacked with other equipment, it should be observed to
verify normal operation in the configuration in which it
will be used.
Warning
The use of accessories and cables other than those
specified, with the exception of replacement parts sold
by Sony Corporation, may result in increased emissions
or decreased immunity of the UP-D711MD.
Compliance
Group 1
Class B
Not applicable.
Not applicable.
Electromagnetic environment-guidance
The UP-D711MD uses RF energy only
for its internal function. Therefore, its RF
emissions are very low and are not likely
to cause any interference in nearby
electronic equipment.
The UP-D711MD is suitable for use in all
establishments, including domestic
establishments and those directly
connected to the public low-voltage
power supply network that supplies
buildings used for domestic purposes.
3
WARNING