Connecting The Dc Cable; Installing The Printer Driver; Paper; Paper You Can Use - Sony UP-D711MD Instructions For Use Manual
Digital graphic printer
Hide thumbs
Also See for UP-D711MD:
- Setup manual (7 pages) ,
- Instructions for use manual (23 pages) ,
- Manual (243 pages)
Table of Contents
Advertisement
Connecting the DC Cable
Insert the connector with the
arrow mark facing up.
Installing the Printer Driver
For computers running on Windows XP/
Windows Vista
After connecting the printer to your computer, turn on
the printer. For details on installation, refer to the
installation guide and Readme file included on the
supplied CD-ROM.
For computers running on Windows 7
Before connecting the printer, install the supplied printer
driver onto your computer. For details on installation,
refer to the installation guide and Readme file included
on the supplied CD-ROM.
Note
Do not allow the connected computer to enter Standby
(Suspend) or Sleep mode while the printer is turned on,
as this may cause the printer to stop operating properly.
Paper
Paper
Use only Sony UPP-84S/84HG paper designed for use
with this unit. High print quality cannot be guaranteed if
any other paper is used with this unit, and such paper
could damage the unit.
Paper You Can Use
Paper characteristics are as follows.
Print Characteristics
Paper Type
Normal
UPP-84S
High Glossy
UPP-84HG
Notes on storing and handling paper
Do not re-use
Doing so may result in malfunction and
negatively affect printing results.
For the customers in Europe
This product has been manufactured by or on behalf of
Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-
0075 Japan. Inquiries related to product compliance
based on European Union legislation shall be addressed
to the authorized representative, Sony Deutschland
GmbH, Hedelfinger Strasse 61, 70327 Stuttgart,
Germany.
Storing unused paper
• Store unused paper at a temperature below 30°C
(86°F) in a dry location that is not exposed to direct
sunlight.
• Do not store unused paper near volatile liquids or
allow the paper to contact any organic volatile liquid,
cellophane tape, or any compound of vinyl chloride.
Loading paper
• Handle the paper carefully when loading to avoid
touching the printing surface with your fingers.
Perspiration or oil from you hands could cause
pictures to blur.
• After removing the sheet from the leading edge of the
paper, pull the paper out about 15 cm (6 in.) before
printing. Sheet adhesive remaining on the paper could
spoil a picture.
Storing printouts
• To prevent printouts from fading or changing color,
store them in a cool, dry location where the
temperature is not higher than 30°C (86°F).
• Store printouts in a polypropylene pouch or between
sheets of paper that contain no plastic.
• Do not store printouts where they will be exposed to
direct sunlight or high humidity.
Page 10
Hide quick links:
Advertisement
Table of Contents
