Specifications - Sony UP-D711MD Instructions For Use Manual

Specifications

Power requirement
DC 12 V to 24 V
Input current 6 A to 3 A
Operating temperature
5 °C to 35 °C (41 °F to 95 °F)
Operating humidity
20% to 80%
Operating pressure
700 hPa to 1,060 hPa
Storage and transport temperature
–20 °C to +60 °C (–4 °F to +140 °F)
Storage and transport humidity
20% to 80%
Storage and transport pressure
700 hPa to 1,060 hPa
Dimensions 140 × 70 × 125 mm (w/h/d)
(5 5/8 × 2 7/8 × 5 inches) Not incl.
projecting parts
Mass 1 kg (2 lb 3.3 oz) (printer only)
Thermal head Thin-film thermal head, 896 dots
Gradation 256-level gradation (8-bit)
Memory capacity
896 × 2688 × 8 (bit)
Picture size 75.7 × 227.1 mm (max.)
Printing speed
About 5 sec./image (896 × 1196 dots)
(High speed print mode)
About 8 sec./image (896 × 1196 dots)
(Normal speed print mode)
Picture elements
896 × 2688 dots (max.)
Dot density H: 75.7 mm/896 dots = 0.085
V: 75.7 mm/896 dots = 0.085
Square dots
Interface USB(full-speed)
Accessories provided
Thermal head cleaning sheet
(4-419-859- ) (1)
CD-ROM (including multi-lingual
operating instructions, Readme and
printer driver) (1)
Before Using this Printer (1)
Service Contact List (1)
Optional accessories
Paper roll: UPP-84S/84HG
Medical Specifications
Protection against harmful ingress of
water:
Ordinary
Degree of safety in the presence of a
flammable anesthetic mixture with
air or with oxygen or nitrous oxide:
Not suitable for use in the presence
of a flammable anesthetic mixture
with air or with oxygen or nitrous
oxide
Mode of operation:
Continuous
The design and these specifications are subject to
change without prior notification.
Notes
• Always verify that the unit is operating properly
before use.
SONY WILL NOT BE LIABLE FOR DAMAGES
OF ANY KIND INCLUDING, BUT NOT
LIMITED TO, COMPENSATION OR
REIMBURSEMENT ON ACCOUNT OF
FAILURE TO PRINT CONTENT OF ANY TYPE
OR LOSS OF DATA DUE TO FAILURE OF THIS
UNIT, ITS PAPER OR ASSOCIATED
SOFTWARE.
• SONY WILL NOT BE LIABLE FOR DAMAGES
OF ANY KIND INCLUDING, BUT NOT
LIMITED TO, COMPENSATION OR
REIMBURSEMENT ON ACCOUNT OF THE
LOSS OF PRESENT OR PROSPECTIVE
PROFITS DUE TO FAILURE OF THIS UNIT,
EITHER DURING THE WARRANTY PERIOD
OR AFTER EXPIRATION OF THE WARRANTY,
OR FOR ANY OTHER REASON
WHATSOEVER.
17
Specifications