superior fires EF11-35 Installation & User's Instructions

superior fires EF11-35 Installation & User's Instructions

Wall mounted electric fire

Advertisement

Quick Links

INSTALLATION & USER INSTRUCTIONS
Superior Fires
Christchurch, Dorset BH23 2BT
Tel: 01202 588 632
Fax: 01202 499326
www.superiorfires.co.uk
e : info@superiorfires.co.uk
Please note: Except where otherwise stated, all rights,
including copyright in the text, images and layout of this
booklet is owned by Focal Point Fires plc. You are not
permitted to copy or adapt any of the content without
the prior written permission of Focal Point Fires plc.
WALL MOUNTED ELECTRIC FIRE
MODELS COVERED BY THESE INSTRUCTIONS
EF11-35
All instructions must be handed to the user for
1
Model shown : Shaftesbury
safekeeping.
Revision A - 07/13
©
2013 Focal Point Fires plc.
GB IE
EF11-35

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EF11-35 and is the answer not in the manual?

Questions and answers

Summary of Contents for superior fires EF11-35

  • Page 1 INSTALLATION & USER INSTRUCTIONS WALL MOUNTED ELECTRIC FIRE GB IE MODELS COVERED BY THESE INSTRUCTIONS EF11-35 Superior Fires Christchurch, Dorset BH23 2BT Tel: 01202 588 632 Fax: 01202 499326 www.superiorfires.co.uk e : info@superiorfires.co.uk EF11-35 Model shown : Shaftesbury Please note: Except where otherwise stated, all rights, including copyright in the text, images and layout of this booklet is owned by Focal Point Fires plc.
  • Page 2: Important Notes

    I N S TA L L AT I O N & U S E R I N S T R U C T I O N S GB IE Section Contents Page No. Section Contents Page No. Important Notes Site Requirements Installation Requirements Clearances to Combustibles Appliance Data...
  • Page 3: Clearances To Combustible Materials

    5.0 COMPONENT CHECKLIST GB IE QUANTITY DESCRIPTION Wall heater Decorative fascia Rear fascia (selected models only) Instruction booklet Remote control Pack of fixing screws and wall plugs (5 x 40mm pozi pan head screws / 5 x wall plugs) Wall mounting bracket 6.0 REQUIREMENTS This appliance is designed to be wall mounted using the mounting bracket and fixings provided.The wall should be relatively flat and not interfere with any of the ventilation slots in the rear panel.
  • Page 4: Cleaning And Maintenance

    8.0 INSTALLING THE APPLIANCE - CONTINUED GB IE positions vertically, into one of the wooden studs, or supporting wooden members of the wall using two of the fixing screws provided. If this is not achievable then the wall should be strengthened using appropriate building materials.

Table of Contents