Page 1
INSTALLATION & USER INSTRUCTIONS INSET LED ELECTRIC FIRE GB IE MODELS COVERED BY THESE INSTRUCTIONS Superior Fires LYDNEY LED ELECTRIC Christchurch, Dorset BH23 2BT IV01D-23 Tel: 01202 588 632 IV01E-23 Fax: 01202 499326 www.superiorfires.co.uk Email : sales@superiorfires.co.uk LYDNEY LED ELECTRIC...
I N S TA L L AT I O N & U S E R I N S T R U C T I O N S GB IE Section Contents Page No. Section Contents Page No. Important Notes Operating the Appliance Installation Requirements Safety Cutout System Appliance Data...
1.0 IMPORTANT NOTES - CONTINUED GB IE • Never immerse the product in water or any other liquids. • DO NOT use the appliance outdoors. • Before cleaning the appliance, ensure it is unplugged from the power and that it is com- pletely cool.
6.0 INSTALLING THE APPLIANCE GB IE 1: Flat wall - If you are putting the fire against a wall with no recess, you will use 213mm 213mm the spacer that is fitted to the fire.You will be able to use either the sticky double sided neoprene strips, or, secure the fire to the wall using the key hole slots on the rear of the spacer frame with screws provided.
8.0 OPERATING THE APPLIANCE GB IE You have following controls: 1. Power ON/OFF: Main power to the unit. If you press the power “ON”, it is not only put the fireplace insert in a standby mode, but also you can see the flame effect through the screen.
3G Service Department to the address below. Alternatively, you can email or fax. Superior Fires, 3G Service Department, Reid Street, Christchurch, Dorset, BH23 2BT. Email: service@superiorfires.co.uk, Fax. 01202 499326.
Need help?
Do you have a question about the IV01D-23 and is the answer not in the manual?
Questions and answers