Configure The Network Settings - Panasonic WV-SPW631LT Installation Manual

Configure the network settings

Configuring the camera so that it can be accessed from a PC
The following are descriptions for when the camera with default settings is configured. If you
are using firewall software on your PC, the Setup Program may not be able to find any
cameras on your network. Configure the setting of the camera after temporarily invalidating
the firewall software. Contact the network administrator or your Internet service provider for
information about configuring the settings of the network.
1
Insert the provided CD-ROM into the CD-ROM drive of your PC.
• The License Agreement will be displayed. Read the Agreement and choose "I accept the
term in the license agreement", and click [OK].
• The launcher window will be displayed. If the launcher window is not displayed, double
click the "CDLauncher.exe" file on the CD-ROM.
Note:
• R efer to "Using the CD-ROM" in the Operating Instructions on the provided CD-ROM for fur-
ther information about CDLauncher.
2
Click the [Run] button next to [IP Setting Software].
[Panasonic IP Setting] screen will be displayed. Click the [Network Settings] button after select-
ing the MAC address/IP address of the camera to be configured.
36