Panasonic WV-SPW631LT Installation Manual page 35

7
Remove the sunshield backside.
As illustrated, opening up the sunshield in both directions makes it easier to remove the rear
part of the sunshield.
• When installing the camera to a ceiling, the rear part of the sunshield and the fixing screws
are not used.
8
Mount the sunshield on the camera body with the 4 sunshield mounting screws after removing
the sunshield backside.
• The sunshield is attached to the camera by inserting the protrusions on the rear cover of the
camera into the attachment holes on the rear part of the sunshield.
IMPORTANT:
• Be sure to use the screws that were removed from the sunshield.
Recommended tightening torque: 0.59 N·m {0.44 lbf·ft}
Fixing screw x2
Rear part of sunshield
Rear part of sunshield
Attachment hole
Protrusion
35