Panasonic WV-SPW631LT Installation Manual page 25

Secure the camera mount bracket when the camera is directly
installed on a wall
Use 4 screws (locally
procured) to secure the
camera mount bracket to a
wall or a junction box (locally
procured).
Required pull-out capacity of
a single screw/bolt is 196 N
{44.06 lbf} or more.
• If a junction box is used,
putting the boxes side by
side is recommended as
(
illustrated. Use unused
junction boxes to pass
cables through for easy
)
cabling.
When the camera is installed on a wall using the adapter box
1
Use 4 screws (locally pro-
cured) to secure the adapt-
er box (accessory) to a wall
or a junction box (locally
procured).
Required pull-out capacity
of a single screw/bolt is
196 N {44.06 lbf} or more.
Mounting screw x4
(locally procured)
6 mm (W) x 10 mm (L) {1/4" (W) x 3/8" (L)} (long hole)
Mounting screw x4
(locally procured)
Camera mount bracket (accessory)
6 mm (W) x 10 mm (L)
{1/4" (W) x 3/8" (L)}
(long hole)
Mounting screw x4
(locally procured)
6 mm (W) x 10 mm (L) {1/4" (W) x
3/8" (L)} (long hole)
46 mm
{1-13/16"}
Cable access hole
Camera mount bracket (accessory)
46 mm {1-13/16"}
83.5 mm
{3-1/4"}
Junction boxes
View from above (internal)
TOP
46 mm
{1-13/16"}
Adapter box (accessory)
Cable access hole (used for wiring)
(The female thread for conduit is compliant
with ANSI NPSM (parallel pipe threads) 3/4
or ISO 228-1 (parallel pipe threads) G3/4.)
20 mm
{13/16"}
Unused
junction boxes
20 mm {13/16"}
Cable access hole
25