Panasonic WV-SPW631LT Installation Manual page 30

2
Adjust the angular field of view and the focus.
Adjust the angular field of view in accordance with the distance between the camera lens and a
photographic subject. These adjustments shall be performed together with the camera angle
adjustment.
When adjusting the angular field of view and the focus from the setup menu
Refer to the Operating Instructions (included in the CD-ROM) for how to perform the manual focus
adjustment from the setup menu.
When adjusting the angular field of view and the focus with the panel of the camera
q Press the TELE or WIDE buttons to move the knob between TELE and WIDE to obtain the
appropriate angular field of view.
Note:
• While the button is held down, the angle of the view moves in the "T" or "W" direction.
• When the angular field of view is adjusted on the TELE side, optical zoom is applied until 3.2x,
and if there are any adjustments above this, extra optical zoom is applied.
• When the image capture size under "VGA" is applied, the zoom factor can be adjusted up to
2x without deterioration of image quality.
• The zooming factor is displayed on the top right of the screen.
• When using the TELE or WIDE buttons to perform operations, the zoom factor stops once at 3.2x. If
operations are continued, the angle of the view can be moved even more in the "T" or "W" directions.
w When the auto focus (AF) button is pressed, the auto focus (AF) indicator will light for around
10 seconds, and the focus is automatically adjusted.
IMPORTANT:
• Do not touch the lens.
• Defocus may be caused by the reinstalled front cover. In this case, perform the auto focus
function from the setup menu.
30
Auto focus (AF)
button
(This illustration represents WV-SPW611.)
TELE button
WIDE button