Table of Contents
Advertisement
Compact 4ch H.264 Network DVR-MU.Ver1.1
Load Settings from USB
This tool can help you load the system environment configuration from the USB device.
Click [
File select] to select the file you would like to load.
Click [ Load File] to load the selected file from USB device. It will show the following
message:
Restore Default Setting
This command resets the system to its default settings.
54
LOAD SETTINGS FROM USB
USB Disk
Free Capacity
Total Capacity
Read File
[
Load File] [
LOAD SETTINGS FROM USB-FILE SELECT
Env2010-07-14_0531.env
Env2010-07-11_0526.env
Env2010-07-09_0525.env
Env2010-07-08_0504.env
LOAD SETTINGS FROM USB
File 'Env2010-07-14_0503.env' Loaded.
System will restart...
UTILITY/TOOLS
Format USB Drive
Firmware Update
Environment Setting
Save Setting to USB
Load Setting from USB
Restore Default Setting
[General Flash Disk]
[905MB]
[1005MB]
[Env2010-07-14_0503]
File Select]
(Generic)
(Generic)
(Generic)
(Generic)
Advertisement
Table of Contents
