Table of Contents
Advertisement
Connect
USB mouse
the
Connect the USB mouse to the mouse port labeled as " " on the DVR.
This port only supports a USB mouse and not other devices.
Connect
the IR Extender (Optional)
Connect the IR extender cable to the port labeled as "IR_ext" on the DVR. The cable is
an optional device which serves as an IR controller extension.
Connect the LCD Monitor
Connect the LCD monitor to the VGA output labeled as "VGA-OUT" on the DVR. The
DVR will transmit the video signal to the LCD monitor through this connection.
Connect the
Power Adaptor
Connect the Power Adaptor to the DC jack labeled as "DC-IN 12V" on the DVR.
Connect the power adaptor after all devices have been properly installed.
Compact 4Ch H.264 Network DVR-MU.Ver1.1
11
Advertisement
Table of Contents
