Motion Area Setup - Rayvision RVH3004 User Manual

3.6.3.7 Trigger Type
There are two trigger types: Initial Trigger and Continuous Trigger.
Initial Trigger
When channel has been triggered, the triggering event will be displayed on full screen for
the duration of the setting period. During that period, this channel will ignore any other
triggering events.
Continuous Trigger:
When channel has been triggered, the triggering event will be displayed on full screen for
the duration of the setting period. The channel is, however, still actively monitoring during
that period. Should there be a new triggering event, this channel will display the more
recent event and restart the display period.

3.6.3.8 Motion Area Setup

The Motion Setup allows the user to block multi areas on screen for every single channel as
motion detection area. Use the mouse or the
area. After positioning, press "
CAUTION
" or click right button of the mouse to save it.
MOTION SETUP
□ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □
□ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □
□ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □
□ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □
□ □ □ □ □ □ □ □ □ □ □ █ █ █ █ █ █ □ □ □
□ □ □ □ □ □ □ □ □ □ □ █ █ █ █ █ █ □ □ □
□ □ □ □ □ □ □ □ □ □ □ █ █ █ █ █ █ □ □ □
□ □ □ □ □ □ □ □ □ □ □ █ █ █ █ █ █ □ □ □
□ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □
There will be no response in Motion Mode when the Motion Area
Setup has not been completed.
Compact 4Ch H.264 Network DVR-MU.Ver1.1
( ), ( ), ( ),
+
( ) buttons to move the
31