Analog Audio Output Signal Source Track Selection; (Anaout Exchng); Digital Audio Output Signal Source Track Selection; (Sdout Exchng) - Sony SRW-5000 Operation Manual

This returns to the AUDIO menu screen.
To make output settings for individual channels
with the F buttons
By pressing any of the [F1] (DIGOUT CH1 TR1) to [F8]
(DIGOUT CH8 TR8) buttons menu, and the [F1]
(DIGOUT CH9) to [F4] (DIGOUT CH12) buttons in the
ALT+DIG OUT screen obtained by pressing the ALT
button, you can select the source track for each channel.
To make input signal selections for individual
channels with the numeric buttons
1
Press the cursor T or t button, to align the cursor
with the channel for which you want to make the
selection.
2
Press the cursor R or r button, to select the source track
to be output.
To return to the default settings
Press the cursor center button. The cursor item returns to
the default.
You can also make this setting using VTR SETUP menu
item 834 "DIGITAL AUDIO OUTPUT EXCHANGE".
4-6-3 Analog Audio Output Signal
Source Track Selection (ANAOUT
EXCHNG)
To make the source track selection for the analog audio
output signal on each of CH1 to CH4, use the following
procedure.
1
Press the [F4] (ANAOUT EXCHNG) button.
The ANAOUT menu appears, together with a source
track selection window for the analog audio output
signals.
A N A O U T
C H 1
T R 1
A N A L O G A U D I O O U T P U T E X C H A N G E
A N A O U T
C H 2
T R 2
A N A O U T
C H 3
T R 3
A N A O U T
C H 4
T R 4
2
Carry out the source track selection for the analog
audio output signal on each channel.
TR1 to TR12: Select the audio signals recorded on
tracks 1 to 12.
92
4-6 AUDIO Menu
C H 1 C H 2 C H 3 C H 4
T R 1 T R 2 T R 3 T R 4
E X I T
3
Press the [F10] (EXIT) button.
This returns to the AUDIO menu screen.
To make output settings for individual channels
with the F buttons
By pressing any of the [F1] (ANAOUT CH1 TR1) to [F4]
(ANAOUT CH4 TR4) buttons, you can select the source
track for each channel.
To make input signal selections for individual
channels with the numeric buttons
1
Press the cursor T or t button, to align the cursor
with the channel for which you want to make the
selection.
2
Press the cursor R or r button, to select the source track
to be output.
To return to the default settings
Press the cursor center button. The cursor item returns to
the default.
You can also make this setting using VTR SETUP menu
item 835 "ANALOG AUDIO OUTPUT EXCHANGE".
4-6-4 Digital Audio Output Signal
Source Track Selection (SDOUT
EXCHNG)
To make the source track selection for the digital audio
output signal (audio multiplexed with SD SDI), use the
following procedure.
1
Press the [F5] (SDOUT EXCHNG) button.
The SDOUT menu appears, together with a source
track selection menu for the digital audio output
signals.
S D O U T
C H 1
T R 1
S D A U D I O O U T P U T E X C H A N G E
S D O U T
C H 2
C H 1
T R 2
T R 1
S D O U T
C H 3
T R 3 C H 5
S D O U T
T R 5
C H 4
T R 4
S D O U T S D O U T S D O U T
C H 5 C H 6 C H 7
T R 5 T R 6 T R 7
2
Press [F9] (SD OUT EXCHNG) to set the display to
"ena"s.
ena: Enable the settings of this menu.
dis: Disable the settings of this menu, and use the
settings for CH1 to CH8 of DIGOUT EXCHNG.
C H 2 C H 3 C H 4
T R 2 T R 3 T R 4
C H 6 C H 7 C H 8
T R 6 T R 7 T R 8
S D O U T S D O U T E X I T
C H 8 E X C H N G
T R 8 d i s