Menu List; Items Relating To Vtr Operations (Nos. 001 To - Sony SRW-5000 Operation Manual

Menu List

This section describes all of the VTR SETUP menu items.
The VTR SETUP menu items are divided into the
following categories by the function.

• Items relating to VTR operations (Nos. 001 to ...)

• Items relating to operation panels (Nos. 101 to ...)
• Items relating to the remote interface (Nos. 201 to ...)
• Items relating to editing (Nos. 301 to ...)
• Items relating to prerolling (Nos. 401 to ...)
• Items relating to recording protection (Nos. 501 to ...)
• Items relating to the time code (Nos. 601 to ...)
• Items relating to the video control (Nos. 706 to ...)
Items Relating to VTR Operations (Nos. 001 to ...)
Item number Item
001 PRE-READ
REC INHIBIT select [off]
002
003 REC INHIBIT
AREA select
140
Menu List
• Items relating to the audio control (Nos. 807 to ...)
• Items relating to digital process (Nos. 902 to ...)
• Items relating to pulldown control (Nos. A01 to ...)
• Other items (Nos. T01 to ...)
For VTR SETUP menu operations, see "4-7-1 VTR
SETUP Menu" on page 97.
In the "Setting" column of the table, the factory default
settings are indicated by an exclosing box.
Setting Function
[off] Selects the pre-read (read-before-write) mode for insert
on editing.
video only off: No pre-read operation
on: Pre-read operation
video only: Pre-read operation for video only
Selects the record inhibit mode.
all/crash REC/video off: Recording is enabled. (The REC INHIBIT indicator
CTL/audio CTL
casst all/crash REC/video CTL/audio CTL: Recording is inhibited
casst: When the recording protection plug on the cassette
[all] Selects the scope to which inhibiting recording applies.
crash REC all: All recording is inhibited. (The REC INHIBIT indicator
video/CTL
audio/CTL crash REC: The normal recording mode is inhibited. Use
casst
video/CTL: Recording of video and CTL is inhibited.
audio/CTL: Recording of audio and CTL is inhibited.
casst: When the recording protection plug on the cassette
The REC INHIBIT indicator lights or flashes to indicate the
state of the recording inhibit mechanism on the cassette.
For details, see item 104.
does not light.)
on the set channels.
The scope of inhibiting recording is determined by
menu item 003.
is pushed in, this setting is displayed. This setting
cannot be selected.
lights.)
this setting when you wish to record in assemble
editing or insert editing only.
is pushed in, this setting is displayed. This setting
cannot be selected.