Lexmark 3200 User Manual page 56

Print the destination lists
1
Locate the MFP. This must be the same MFP with the IP address where the destination lists
were created and stored.
2
Press Menu > repeatedly until you see Destinations, and then press Select.
3
Press Menu > repeatedly until you see the list you want to print (for example, Print E-mail
List), and then press Select. Information about each destination is contained in the list. The
following illustration is an example of one type of list.
E-Mail Destinations
NameAddressTypeShortcut #
-------------------------------------------
Smith, Janesmith@mailgw.anywhere.comAttachment5
Smith, Jane2smith@mailgw.anywhere.comWeb Link6
Doe, Johndoe@newaddress.comWeb Link12
Print the shortcut list
When creating permanent destinations for the MFP, your systems person may have assigned
shortcut numbers. A shortcut lets you send to a destination by pressing # and entering the shortcut
number on the numeric keypad of the MFP control panel.
Posting a printed shortcut list close to the MFP can reduce the time spent searching for destinations
in the control panel menus.
1
Locate the MFP. This must be the same MFP with the IP address where the destination lists
were created and stored.
2
Press Menu > repeatedly until you see Shortcuts, and then press Select.
3
Press Menu > repeatedly until you see Print List, and then press Select.
----------------------------
------------------- ---------------
Work with destination lists
51