Adjust Analog Receive Fax Options; Adjust Analog Fax Log Options - Lexmark 3200 User Manual

Adjust analog receive fax options

Option
Fax Storage
Fax Paper Size
Fax Paper Type
Output Bin
Auto Reduction
Rings to Answer
Distinctive Ring Feature

Adjust analog fax log options

Option
Print Send Log
Print Rcv Log
Auto Print Logs
Clear Logs
Transmission Log
Description
Determines whether or not the incoming faxes are stored if they cannot
immediately be printed.
The settings are ON or OFF. The default setting is ON.
Defines the size of paper on which incoming faxes are to be printed
(letter, legal and so on) if the requested size is not available.
Defines the type of paper on which incoming faxes are to be printed
(plain paper, card stock, and so on). If the requested type is not
available, the printer prompts for the correct paper to be loaded.
Defines the output bin where incoming faxes are to be printed (standard
bin, bin 1, or bin 2).
Sets the printer to fit incoming faxes to the available Fax Paper Size.
The choices are YES and NO.
Lets you set the number of times the phone rings before the fax
answers.
The default for the fax modem port is to answer incoming calls on the
first ring. Other choices range from 1 through 25.
Three options are available:
• Enable Single Ring Pattern
• Enable Double Ring Pattern
• Enable Triple Ring Pattern
All options are enabled by default. By changing these settings, you
control which type of ring the MFP answers.
Description
Prints a list of faxes sent.
Prints a list of received faxes.
Automatically prints both fax logs when the log is full. The setting must
be ON (default).
When the setting is OFF, the log is maintained, but not automatically
printed. Also, the oldest log entries are removed when the log becomes
full.
Removes all entries from the send and receive logs.
Specifies that when you send a fax, a transmission log is printed to
verify the fax was sent correctly.
The settings are Always (default), Never, or Error Only.
Adjust analog receive fax options
27