Shock Absorber - THUNDER TIGER Tomahawk Maintenance Manual & Parts Catalogue

STEP7

Shock Absorber

1
2.5mm
E-Clips
E
2 Shock Eyelet
3 2.8x1.9mm
O-Ring
O
4
Front Shock Shaft
5
Rear Shock Shaft
Pull down the piston and
slowly fill in the silicon oil.
The factory set-up of the
shock is #500 of silicon oil
Silicon oil
for the front and rear shock
absorbers.
Piston
Then gently move the shaft/piston
up and down to get rid of the
bubbles.
1mm
4mm
Use 2 mm preload spacer for front. Use 2 mm preload spacer for rear.
2mm
Hint Apply silicon oil
oil
8
1
4
1
4 or
5
8
2
Cover the shaft with cloth before
griping it with pliers.
2
#500
2mm
6mm
2 4
x x
2
3
3
Add silicon oil one more
time up to the brim.
Put the shock bladder onto
the shock body, wipe off
excess oil and tighten the
shock cap.
Assemble as many times as specified
10
Attach the shock eyelet onto
the shock shaft until it
reaches the mark line on
the shaft
2 2
x x
Rear x2
Front x2
2
2
4
x
Ensure the piston move
smoothly.
2
Front x2
x
Rear x2
Compress the spring
and install spring cup.
2
2