Table of Contents
Advertisement
8
OPERATING RADIO STEERING FUNCTION 遙控器設定－轉向
a
a. Check the radio steering functions. With the radio transmitter and receiver on, turn the steering wheel to the left. The front tires/wheels
should turn left accordingly. If not, flip the steering servo reverse switch.
b. Return the steering wheel to neutral. The front tires/wheels should point straight forward. If not, use the steering trim lever to
correct it.
c. Turn the steering wheel to the right. The front tires/wheels should turn right accordingly.
a. 確認轉向功能。打開發射機及接收機電源，方向轉左邊時，輪胎將朝向左邊，若方向不一致，請調整方向的正逆轉開關。
b. 方向回中立點時，前輪應筆直向前，若有偏差，請調整方向微調旋鈕。
c. 方向轉向右邊時，前輪應轉向右邊。
9
ADJUSTING THE ESC 速控器調整
Before adjusting the ESC, read the instructions for the ESC first.
調整電子速控器前，請先詳閱電子速控器的操作說明。
10
DRIVING BASIC
操控基本動作
11
SHOCK ADJUSTMENT 避震器懸吊調整
12
WHEEL AND TIRE PREPARATION 輪胎及輪轂
a
a. Remove wheel lock nut using the 4-way wrench and detach wheels.
b. Replace fresh tires and wheels if the original tires are worn out.
c. Tighten the wheel lock nut.
b
Stop (Neutral)
Brake
停（中立點）
煞車
10mm
Hard Suspension
懸吊較硬
Use the included shock clips to adjust for spring pre-load.
使用內附的避震器調整環，調整車身高度。更詳細的調整方式請參考設定。
b
a. 使用內附之六角螺帽套筒板手將輪轂上六角固定螺帽取下。
b. 將已磨損嚴重之輪胎組取下後，換上新的輪胎組。
c. 將六角固定螺帽重新鎖緊。
8
c
Reverse
後退
5mm
3mm
c
Acceleration
加速
2mm
1mm
Soft Suspension
懸吊較軟
Advertisement
Table of Contents
