Section Ii - Using Software Input Monitoring - Lexicon Recording Studio Owner's Manual

Using Software Input Monitoring

SECTION II - USING SOFTWARE INPUT MONITORING

The previous examples have turned off Cubase
while recording tracks, and used the Monitor Mix knob on the front of the Alpha
Studio™ hardware to directly monitor an input without latency. Software monitoring
lets you listen to software-based effects in real time and adjust the monitor mix indepen-
dently of the recording levels, but also introduces some latency (delay) into the input
signal. The amount of latency depends on the amount of buffers assigned in the ASIO
control panel. See page 31 for more information about adjusting buffer settings.
1. When using Cubase LE's input software monitoring with the Alpha Studio, you will
2. Click the Input Monitoring
3. Click the Track Edit button.
want to set the Monitor Mix knob all the way to the Playback side.
will now be able to hear your input. Now you can try assigning an effect on the
input. This example assigns a Pantheon™ reverb.
28
® LE's Input Monitoring software switches
button on the track you are recording to. You