MOTU UltraLite AVB User Manual page 50

Main Menu
Turn the SELECT knob to scroll through the menu
settings.
Push SELECT to enter the selected sub-menu or to
select the currently highlighted parameter.
Push BACK to go to the parent menu.
To exit the menu entirely, push BACK repeatedly
until the menu disappears from the display.
Device menu
The Device menu provides information about the
device, such as its name and connection mode
(USB or AVB).
Network menu
The Network menu displays the following
network-related information:
Setting Explanation
Serial/UID Unique AVB network identifier that can be
used for troubleshooting.
IP address The unique network address for the unit.
Type this address into your web browser to
access the unit's settings in the MOTU
AVB Control web app.
AVB Indicates whether AVB networking is cur-
rently enabled or disabled. For example,
AVB could be disabled because a non-AVB
switch is being used. When AVB is dis-
abled, audio streaming over the network is
disabled.
50
Settings menu
The Settings menu provides access to basic
hardware settings, such as Clock Mode, Sample
Rate, and so on.
Setting What it does
Clock Mode Sets the digital audio clock source for the
device.
Sample Rate Sets the sample rate for the device.
Optical Specifies ADAT or TOSLink, or the SMUX
format when operating at 88.2 or 96 kHz.
See "Optical I/O" on page 39.
Configure IP Chooses between DHCP and a manually
assigned IP Address.
LCD Contrast Adjusts the contrast of the LCD.
Factory Defaults Restores factory default settings.
Presets menu
The Presets menu lets you recall settings that have
been saved as a device preset. Use the web app to
create and save presets (item #7 in the "Device tab"
on page 12).
Version menu
The Version menu displays firmware version info.
CLOCK
The Clock section of the LCD (Figure 6-1 on
page 49) displays the sample rate at which the unit
is currently operating, and the current Clock Mode
setting (item #13 in the Devices tab on page 12).
The Clock Mode setting can also be found (and
changed) in the Settings Menu.
STAND-ALONE OPERATION
All settings, including mix settings and device
settings, are saved in the UltraLite AVB's memory.
They remain in effect even when the interface is not
connected to a computer. This allows you to use the
UltraLite AVB as a stand-alone mixer. You can
make adjustments to any setting at any time from
the web app running on a device that has a network
connection to the UltraLite AVB, as explained in
"Setup for web app control" on page 36.
T H E F R O N T P A N E L L C D