Load Output
Terminal Blocks
Line Voltage
AC Wire / Conduit
Entry
Line Voltage
AC Contractor
Termination
Section
Line Voltage
AC Wire / Conduit
Entry
Dimmer Output
JS-ICON
2410
™
JS-ICON
2413
™
JS-ICON
™
1220
JS-ICON
1210/620 12 x 10 Amp (1200 Watt) and
™
JS-ICON
Series dimmer racks are designed for high performance dimming of
™
standard incandescent, quartz, and dimmable (SCR/Leading-Edge) electronic
low-voltage fixtures. The dimmer outputs may be configured for non-dimmed
applications when switched (relay controlled) load outputs are required.
Knockouts on the top and bottom of the chassis are provided for wire/conduit
entry to the power terminals.
Load (Hot) Output Connection Details
Load output connections are terminated via DIN rail mounted terminal blocks.
Models JS-ICON
•
Use wire size #14 to #10 AWG. Strip insulation length to 0.315" (8mm).
•
Torque load output terminal blocks to 5-7 IN-LBS (0.6-0.8 NM).
Model JS-ICON
•
Use wire size #14 to #8 AWG. Strip insulation length to 0.4" (10mm).
•
Torque load output terminal blocks to 13-16 IN-LBS (1.5-1.8 NM).
Low Voltage
DC Wire / Conduit
Entry
TOP VIEW
Low Voltage
DC Contractor
Termination
Section
REAR VIEW
Low Voltage
BOTTOM VIEW
DC Wire / Conduit
Entry
www.johnsonsystems.com
24 x 10 Amp (1200 Watt) dimmers.
24 x 13 Amp (1560 Watt) dimmers.
12 x 20 Amp (2400 Watt) dimmers.
6 x 20 Amp (2400 Watt) dimmers.
2410 and JS-ICON
™
1220
™
Model JS-ICON
•
For load output terminal blocks 1 to 12, use
same specification as Model JS-ICON
2410.
•
For load output terminal blocks 13 to 18,
use same specification as Model JS-
ICON
™
1220.
NOTE: For connection use copper wire
only, rated for 167°F (75°C) minimum.
2413
™
1210/620
™
™
9