JOHNSON SYSTEMS JS-ICON 2410 User Manual page 30

SCENE>FL
V-LIMIT?
DCPATCH?
FD-TIME?
2 ROOM?
ALL?
PRINTING
47. DEFAULTS
ØPATCH1?
ØPATCH2?
ØPATCH3?
ØPATCH4?
ØPATCH5?
ØPATCH6?
ØPATCH7?
ØPATCH8?
ØPATCH9?
CURVES?
ANA-OFF?
V-LIMIT?
DCPATCH?
FD-TIME?
2 ROOM?
SURE???
DONE!!!
48. LCD VIEW
ADJUST
30
Press MENU ( ) to select the desired scene (01 to 24) or all scenes (FL).
Prints the output voltage limit settings for each of the 24 dimmer outputs.
Prints the configuration settings for the dimmer to channel patch.
Prints the fade time settings for each of the 24 scenes.
Prints the two room assignment for each of the 24 dimmer outputs.
Printout all items at once.
Press EXECUTE on any item to begin printing.
Press ESCAPE or RESET to exit the menu.
Set various system configuration settings to the factory default.
Press EXECUTE to enter the menu.
Press MENU ( ) to scroll through and select which item(s) to default.
Phase patch for JS-ICON 2410 and JS-ICON
™
Dimmer phase assignment is AAAAAAAABBBBBBBBCCCCCCCC.
Phase patch for JS-ICON 1220 with Three -Phase power.
™
Dimmer phase assignment is AAAABBBBCCCC (13-24 are unused).
Phase patch for JS-ICON 1210/620 with Three-Phase power.
™
Dimmer phase assignment is AAAAAAAABBBBBBCCCC (19-24 are unused).
Phase patch for JS-ICON 2410 and JS-ICON
™
Dimmer phase assignment is AAAAAAAAAAAABBBBBBBBBBBB.
Phase patch for JS-ICON 1220 with Single-Phase power.
™
Dimmer phase assignment is AAAAAABBBBBB (13-24 are unused).
Phase patch for JS-ICON 1210/620 with Single-Phase power.
™
Dimmer phase assignment is AAAAAAAAAAAABBBBBB (19-24 are unused).
Patches all PWM output channels to ØA. Not used with JS-ICON
Phase patch for DE90-3000 Series retrofit control systems.
Phase patch for DE90-3000 Series retrofit control systems.
Sets all 24 dimmer curve profiles to Square Law curve.
Clears the control channel patch for all 4 analog inputs.
Sets the output voltage limit to full (127.5) on all 24 dimmer outputs.
Clears the dimmer to channel patch and configures it for 1:1 operation.
Sets the fade time at 5 seconds for all 24 scenes.
Sets the two room assignment to room "A" on all 24 dimmer outputs.
Press EXECUTE to select the item to default. Are you sure?
Press EXECUTE to set the selected default.
Press ESCAPE or RESET to exit the menu.
Adjust the contrast of the LCD Display for optimum viewing.
Press EXECUTE to enter the menu.
Press MENU ( ) to adjust the contrast.
Press ESCAPE to exit the menu and save the desired LCD view.
Press RESET to exit the menu without saving.
The menu will automatically timeout after 2 minutes of inactivity and save.
www.johnsonsystems.com
2413 with Three-Phase power.
™
2413 with Single-Phase power.
™
product.
™