1-3-15. S Board Removal
To remove the S board, remove the C board, opt unit Assy, lamp assy, S prism block assy and
DC fan (sirocco) beforehand.
1 Adjuster section
VPL-CS5A/CS6/CX6/EX1
2 Remove the
binding band
7 Adjuster frame assy
4 Two screws
(+P 2 x 4)
6 Adjuster shaft
CN1
5 Remove the adjuster holder
in the direction of the arrow.
3 Four screws
(+P 2 x 2.2)
9 S board
8 Two screws
(+P 2 x 4)
VR shaft
1-11